Inhaltsverzeichnis
The parameters of signals
from Simutrans version 0.89.00{TRAFD(fields=>9,filtervalue=>2)}{TRAFD}
The Experimental parameters
additional parameters at waytype=track / monorail_track
Parameter | Value | Meaning |
---|---|---|
is_signal | 1 |
normal signal - checks the distance to the next signal or maintenance |
is_presignal | 1 |
2-Block Signal |
Of these parameters is always only one permitted. | ||
can is_signal the parameter together with one of the following parameters each provide a different type of signal: | ||
is_signal free_route |
1 1 |
Signal with a free platform choice (Choose) |
is_signal end_of_choose |
0 1 |
End for signal with clear platform choice (End of Choose) |
is_signal is_longblocksignal |
1 1 |
Route signal - checks the route always until the next signal (LongBlock) |
ab Ver. 0.99.08 | ||
single_way min_speed |
1 0 |
Sign indicating a direction locks |
The Experimental parameters
Parameter | Value | Meaning |
---|---|---|
is_signal | 1 |
normal signal - checks the distance to the next signal or maintenance |
is_presignal | 1 |
2-Block Signal |
additional parameters at waytype=road
Parameter | Value | Meaning |
---|---|---|
is_private | 1 |
only own vehicles can pass traffic sign |
single_way min_speed |
1 0 |
Road sign locks a direction |
free_route | 1 |
Road sign with free holding stop |
min_speed | 50 |
minimum speed for vehicles which are allowed to pass |
{TRAFD(fields=>9,filtervalue=>1)}{TRAFD}
Graphics parameters and examples
Rail signals (railway / tramway, monorail / maglev)
signale_src.zip (7.85 Kb)
Signals / Choose signals / track signals (Long Block signal)
Graphic file signale.png
Dat-Datei Signals.dat Copy to clipboard
|
The parameters Image[0] to Image[7] define the light signals. If any form of signals are defined, then these are always displayed. If semaphores defined, the light signals are displayed at electrified lines. The parameters Image[8] to Image[15] define the shape signals. This can also be omitted. The image parameters are the same for normal signals, selection signals (Choose) and track signals (Long Block). |
{TRAFD(fields=>9,filtervalue=>1)}{TRAFD}
2-Block-Signale
Graphic file pre_signale.png
Dat file preSignals.dat Copy to clipboard
|
The parameters Image[0] to Image[7] define the light signals. If any form of signals are defined, then these are always displayed. If semaphores defined, the light signals are displayed at electrified lines. The parameters Image[8] to Image[15] define the shape signals. This can also be omitted. |
{TRAFD(fields=>9,filtervalue=>1)}{TRAFD}
Road Signs
NoEntry_src.zip (1.40 Kb)
Graphic file NoEntry.png The 4 Image parameters are the same for all signal signs. |
Dat file NoEntry.dat Copy to clipboard
|
{TRAFD(fields=>9,filtervalue=>1)}{TRAFD}
{TRAFD(fields=>9,filtervalue=>4)}{TRAFD}
The Parameter waytype
This parameter defines, for which traffic routes the signal applies.
Value | Meaning |
---|---|
road | Road |
track | Railroad |
monorail_track | Monorail |
maglev_track | Maglev |
water | Waterway |
air | Taxiway / Runway airports |
Simutrans Experimental
This parameter defines, for which traffic routes the signal applies.
Value | Meaning |
---|---|
road | Road |
track | Railroad |
monorail_track | Monorail |
maglev_track | Maglev |
water | Waterway |
air | Taxiway / Runway airports |
back
Der Parameter Name
{TRAFD(fields=>9,filtervalue=>3)}{TRAFD}
back
{TRAFD(fields=>9,filtervalue=>1)}{TRAFD}
Simutrans Experimental
Die letzten Wiki-Kommentare